A steel locking washer for 22-25mm Beneteau, Jeanneau and Radice propellers. The tab washer is located between the propeller and the tailpiece nut and is used to lock the nut to prevent it from undoing. It is advisable to replace the lock ring whenever the propeller is refitted, but not compulsory.
Fits the following:
00400.
00400MG.
00400E.
00400EMG.
00410.
Specifications:
Please refer to the diagram in the product images.
Click on any of the part numbers below to be taken to the respective product.
| Part No. | c | Ø | Ø1 | Weight |
| 00410R | 6mm | 38mm | 16mm | 0.005kg |
| 00411R | 8mm | 46mm | 20mm | 0.010kg |
| 00412R | 10mm | 51mm | 24mm | 0.010kg |
| 00413R | 12mm | 53mm | 24mm | 0.015kg |
| 00414R | 14mm | 66mm | 33mm | 0.020kg |
| 00415R | 14mm | 76mm | 37mm | 0.025kg |
| 00416R | 16mm | 81mm | 40mm | 0.030kg |
| 00419R | 20mm | 100mm | 50mm | 0.050kg |
Useful Links:
Category: Explore our full range of Beneteau and Jeanneau Propeller Anodes.
Blog: How often should a sacrificial anode be replaced on a boat?
Blog: Cathodic protection for boats.
Blog: Aluminium versus zinc anodes.
